What is a typical water emergency?

    • A water main leak causing flooding/damage or icy conditions in the winter.
    • A service line leak outside of the home causing flooding/damage or icy conditions in the winter.
    • A leak inside the home causing flooding/damage and the inside valve is inoperable.

    What is a typical wastewater emergency?

    • A basement back up of wastewater.
    • A manhole or clean out that is overflowing.

     

      EMERGENCY HOTLINE:

      (724) 755-5800

      24 hours a day / 7 days a week

       

      PLEASE CALL 911 IF YOU ARE EXPERIENCING A HAZARDOUS EMERGENCY SITUATION

      Wastewater Treatment

      When Did Wastewater Treatment Begin?
      Treatment of wastewater is a relatively modern practice. While sewers were common in ancient Rome to remove foul-smelling water, it was not until the 19th century that large cities began to reduce the amount of pollutants in the wastewater they were discharging to the environment. Since that time, the practice of wastewater collection and treatment has undergone substantial engineering improvements, and many state and federal regulations have been enacted.

      How Does Wastewater Treatment Work?
      Most homes, businesses, and institutions are connected to a sewer system that conveys their wastewater to a public wastewater treatment plant. Sanitary sewer systems carry only domestic and industrial wastewater, while combined sewer systems also carry stormwater runoff. At the plant, the wastewater is cleaned and returned to the environment to be used over and over again.

      Wastewater flows by gravity with occasional help from pumps until it reaches the treatment plant. What happens in a wastewater treatment plant is essentially the same as what occurs naturally in a lake or stream. The function of a wastewater treatment plant is to speed up the process by which water is cleaned naturally. Treatment plants are operated by a treatment team that is committed to protecting public health and the environment.

      How Is Wastewater Treated?
      Wastewater is typically treated through a series of five major steps followed by processes to reuse or to dispose of the remaining products. This treatment requires an intricate balance of physical, biological, and chemical processes. They include:

      • Preliminary Treatment includes screening to remove large objects (such as sticks, rags, leaves, and trash) and the settling of grit (heavy, sandy, abrasive matter). The material is collected and discarded, and the remaining flow moves on to primary treatment.

      • Primary Treatment involves the reduction of the wastewater flow to remove easily settleable and floatable solids using primary tanks known as clarifiers. Solids removed from this process are often sent to the solids handling portion of the plant.

      • Secondary Treatment is designed to grow naturally occurring microorganisms to digest organic material, sometimes remove nutrients, and then to settle to the bottom of a secondary sedimentation basin.

      • Disinfection destroys pathogenic organisms in the effluent before it is discharged into the receiving water body to help protect the public from exposure to pathogens. Alternatives for disinfection include chlorination followed by dechlorination, exposure to ultraviolet light, and the infusion of ozone.

      • Solids Handling involves the treatment of the solids removed from the water treatment processes to be made acceptable for landfills.

      What Happens to the Products of Wastewater Treatment?
      The two main products of the wastewater treatment process are clean water and the collected solids that, after treatment, are known as biosolids. Some communities further treat clean water for recycling so it can be used in ways such as golf course and landscape irrigation, and even groundwater recharge programs.

      Source: http://www.wef.org